Geomax EZ DIG Touch 4 Sensor Excavator Depth System

Geomax EZ Dig ‘T’ (Touch) model with the additional 4th sensor that compensates for the chassis pitch in the angle of the bucket. Don’t pay a guy to hold a grade rod or keep getting in and out of your machine to check grade. The dipper stick includes the ‘Laser Catcher’ window if you want to use a laser to bench instead of having a known point after the machine is moved to re-bench on. The 7′ Color Display shows cut, fill, % and the angle of the bucket and it doesn’t matter if you are plumb or what angle anything is at….all measurements are to the cutting teeth.

All installation accessories are included, even the laser. The sensors are mounted using a 2 sided 3M VHB tape ( No Welding), and you mount the sensor mounting plate so the sensors can be removed from the plate when doing demo work. When you want to use the system again, just snap them back in the mounting plates and you’re ready to go, no re-calibration required. All you’ll need to install this system is a tripod and about 45 minutes. You can store up to 100 different machines and 100 different buckets for that machine per system. Once you calibrate a machine, simply store it and you’re done. Put it back on that machine, just call up the model from you machine list and you’re ready to go to work. All sensors are 360 Degree sensors. They are charged via integrated solar panels, go into a sleep mode when not being used and powered off 100% when taken off of the mounting plate. No cables are required. The display simply plugs into your 12/24 volt power outlet. There is a display with cut/fill lights that mounts to the lower window so you don’t need to take your eyes away from your work. You can set each LED up for 0.05′ or 0.1 etc. so you know how far you need to cut, or you can look at the display ind it will show you exactly.