Spectra Precision GL710 Single Slope Steep Grade Laser With CR600 Receiver 3000 FT Range

CR600 Receiver:

The Spectra Precision Laser CR600 Receiver is ideal for contractors doing both site prep and general construction. The CR600 can be either rod or machine mounted, making it ideal for a wide range of applications. Using the magnetic mount, the CR600 receiver is easily moved between backhoes, small excavators, box blades or skid steer loaders. With such a high degree of flexibility, the CR600 needs to be tough enough for any job.

Features & Benefits:

• Designed for tough construction site conditions. Rugged, waterproof, lightweight magnesium housing can withstand a drop of up to 3 m (10 ft) on concrete.
• Super-bright colored LED elevation indicators visibly indicate grade elevation information to the operatorufffdeven in poor light and up to 100 m (350 ft) in bright sunlight.
• Adjustable bandwidth lets the operator tighten the on-grade band to easily meet a variety of accuracy requirements with tighter tolerances ufffd from rough grading through form leveling.
• Wraparound receiver cells with continuous pickup through an operating range of 270ufffd provide less dead spots and improved productivity, especially for machine applications.
• Longer, above-grade receiver cells make digging with a back hoe easier than ever.

HL700 Receiver:

The HL700 features a digital readout of elevation that provides a numeric display of +/- 5 cm (+/- 2 inches). The readout is displayed on the large front and rear LCD’s and shows exactly how far the elevation is from on-grade. Accurate measurements can be made without moving the rod clamp, saving time and increasing productivity. Selectable units of measure can be displayed meeting your application – mm, cm, ft, in or fractional inches.

A 12.7 cm (5 inch) reception height, more than double the industry standard, allows quick acquisition of the laser beam. An anti-strobe sensor prevents false readings from site strobe lights.

The Laserometer is designed to survive the tough construction site conditions, it is totally waterproof and can withstand a drop of 3 meters (10 feet) onto concrete. The HL700 offers a 3-year ‘No Excuses’ warranty.

The HL700 can be used as either a hand-held or rod mounted receiver for a wide range of applications.

Features and Benefits:

• Digital readout of elevation – not only will high or low arrows be displayed, but the exact distance from grade will be numerically displayed, which eliminates the need to get ‘on-grade’ to make measurements.
• Large 12.7 cm (5 inch) reception height acquires the beam quickly and makes it easy to stay in the beam.
• Anti-strobe sensor stops construction strobe lights from setting off the receiver, and makes it easier to identify true laser beam signals.
• Simultaneous elevation LED’s signal in low light levels and over a longer range for easier reading in poor light conditions.
• New CAPTURE function remotely captures and retains a measurement when the display is difficult to see.
• Multiple deadband setting allows adaptation to meet all your jobsite requirements.
• Dust and weatherproof housing withstands a drop of up to 3 m (10 ft) onto concrete for reduced downtime.
• Two clamp positions for cut/fill or excavation. Excavation mode puts more reception height and elevation information above grade for higher utilization in digging and staking applications.
  
  

Package Includes:



– GL710 Laser Unit

– HL700 Receiver or CR600 Receiver with Mount and Rod Clamp

– NiMH Rechargeable Batteries and Charger

– Interior PowerCord to plug in the wall

– Exterior Power Cord toattach to the car battery

– Receiver Manual

– Laser Manual,

– Laser Card

– Hard Waterproof Carrying Case

– Manual

– One year manufacturers warranty

– Bonus: AdirPro Aluminum Tripod

– Bonus: AdirPro 16ft grade rod Inches or tenths upon request